EFFECT OF THE SANDS CLOSE TO THE MASCARA REGION IN THE MANUFACTURE OF SELF-COMPACTING MORTARS
DOI:
https://doi.org/10.4314/jfas.v12i2.28Keywords:
Self-compacting mortar, Sand, FormulationAbstract
Sand plays a very important role during the manufacture of concrete and mortar for the need of civil engineering and building. It influences both the properties of cementary materials in the fresh state and in the hardened state. The objective of this work is the development of self-compacting mortars with the various sands existing in the region of the city of Mascara for the main study of mechanical performance. Six sands were used for this purpose: three natural sands and three crushed sands. The tests carried out during this research are: physical tests, tests in the fresh state and tests on hardened mortars. The results to which our research has led is that self-compacting mortars made with crushed sands give a granular skeleton with high compactness and superior mechanical performance compared to self-compacting mortars made with natural sands.
Downloads
Download data is not yet available.
References
[1] Chabot A., Aperçu de l’étendue des gisements de sables destinés à l’industrie de la construction et dans d’autres secteurs d’activités. Géofina, 2011.
[2] Arab A. Comportement monotone et cyclique d’un sable limoneux. Comptes Rendus Mécanique- Elsévier, 2009, 337(8), 621-631.
[3] Holcim Western Europe, Materials & Applications Center, Concevoir et mettre en œuvre des bétons durables. Guide pratique, Holcim (Belgique) SA, 2007.
[4] ASTM C33- 03, Standard Specification for Concrete Aggregates, ASTM International, West Conshohocken, PA. 2003. DOI: 10. 1520/C0033-03.www.astm.org
[5] Hamid H.. Influence des paramètres morphologiques des granulats sur le comportement rhéologique des bétons frais: étude sur systèmes modèles. Université Paris-Est, 2012.
[6] Yugen L., Huimei Z., Guangxiu L., Dawei H.., Xiangrong M.. Multi-scale study on mechanical property and strength prediction of aeolian sand concrete. Construction and Building Materials. 2020, 247, ,118538.https://doi.org/10.1016/j.conbuildmat.2020.118538
[7] http://www.lafargena.com/wps/portal/na/fr/3_A_11_12The_Effect_of_Aggregate_
Gradation_and_Fineness_on_Concrete_Properties.
[8] Yirui Z., Yang W., Jiawen B., Gang W., Zhiqiang D.. A novel seawater and sea sand concrete filled FRP-carbon steel composite tube column: Concept and behaviour.Composite Structures. 2020, 112421. In Press, Journal Pre-proof.https://doi.org/10.1016/j.compstruct.2020.112421.
[9] Junlong Y., Jizhong W., Ziru W. Axial Compressive Behavior of Partially CFRP Confined Seawater Sea-sand Concrete in Circular Columns– Part I: Experimental Study. Composite Structures. 2020, 112373. In Press, Journal Pre-proof. https://doi.org/10.1016/j.compstruct.2020.112373
[10] Safi B., Saidi M., Daoui A., Bellal A., Mechekak A. and Toumi K.. The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM), Construction and Buildings Materials. 2015, 78: 430-438
[11] Matthew Z., Yeon T., Kwong S. W., Muhammad E. R., Meheron S. J.. Mechanical and durability performance of marine sand and seawater concrete incorporating silicomanganese slag as coarse aggregate. Construction and Building Materials. Volume 254, 10 September 2020, 119195. https://doi.org/10.1016/j.conbuildmat.2020.119195
[12] Kaufmann J.. Evaluation of the combination of desert sand and calcium sulfoaluminate cement for the production of concrete. Construction and Building Materials. Volume 243, 20 May 2020, 118281. https://doi.org/10.1016/j.conbuildmat.2020.118281
[13] Benabed B., Kadri E. , Azzouz L. and Kenai S. , Properties of self compacting mortar made with various types of sand, Cement and Concrete Composites. 2012,34(10): 1167-1173
[14] Zeghichi L. 1 , Benghazi Z. 1 , Baali L., Eighth International Conference on Material Sciences, CSM8-ISM5 The effect of the kind of sands and additions on the mechanical behavior of S.C.C, Physics Procedia, 2014, 55: 485 – 492
[15] B. Benabed, L. Azzouz, E. Kadri, A. S. E. Belaidi, H. Soualhi. Propriétés physico-mécaniques et durabilité des mortiers à base du sable de dunes, université d’Amar Telidji de Laghouat, Algérie. 2012. http://www.univ-tebessa.dz/fichiers/laghouat /Contribution 1300.pdf 16/12/2016
[16] Srivastava A., Singh S. K.. Utilization of alternative sand for preparation of sustainable mortar: A review. Journal of Cleaner Production. 2020, 25320, Article 119706. https://doi.org /10.1016/j.jclepro.2019.119706
[17] Imane Joudi-bahri. Influence des sables fillérisés calcaires sur les propriétés des bétons courants et superplastifiés. Un exemple tunisien, thèse de doctorat, université Lorraine France. 2012.
[18] Arabi N., Meftah H., Amara H., Kebaïli O., Berredjem L.. Valorization of recycled materials in development of self-compacting concrete: Mixing recycled concrete aggregates – Windshield waste glass aggregates. Construction and Building Materials. 2019, 209: 364-376.
[19] NA 442-2008, Liants Hydrauliques-Ciments Courants, Composition, « Spécification et Critères de Conformité », IANOR, Alger (2008).
[20] NF EN 933-1 Mai 2012 Essais pour déterminer les caractéristiques géométriques des granulats - Partie 1 : détermination de la granularité - Analyse granulométrique par tamisage
[21] NF P18-597-1979 aggregates. Determination of cleanness for fine aggregates: sand equivalent with 10 per cent fines.
[22] NF EN 12350-2 Avril 2012 Essais pour béton frais - Partie 2 : essai d'affaissement -
[23] ASTM C 109-13,1 In: American Society for Testing and Materials (ASTM) International, West Conshohocken, Pa, (2013).
[24] NF EN 13057 décembre 2002. Indice de classement : P 18-945. Produits et systèmes pour la protection et la réparation des structures en béton. Méthodes d'essai. Détermination de l'absorption capillaire. Association Française de Normalisation (AFNOR) — 11, avenue Francis de Pressensé — 93571 Saint-Denis La Plaine Cedex.
[2] Arab A. Comportement monotone et cyclique d’un sable limoneux. Comptes Rendus Mécanique- Elsévier, 2009, 337(8), 621-631.
[3] Holcim Western Europe, Materials & Applications Center, Concevoir et mettre en œuvre des bétons durables. Guide pratique, Holcim (Belgique) SA, 2007.
[4] ASTM C33- 03, Standard Specification for Concrete Aggregates, ASTM International, West Conshohocken, PA. 2003. DOI: 10. 1520/C0033-03.www.astm.org
[5] Hamid H.. Influence des paramètres morphologiques des granulats sur le comportement rhéologique des bétons frais: étude sur systèmes modèles. Université Paris-Est, 2012.
[6] Yugen L., Huimei Z., Guangxiu L., Dawei H.., Xiangrong M.. Multi-scale study on mechanical property and strength prediction of aeolian sand concrete. Construction and Building Materials. 2020, 247, ,118538.https://doi.org/10.1016/j.conbuildmat.2020.118538
[7] http://www.lafargena.com/wps/portal/na/fr/3_A_11_12The_Effect_of_Aggregate_
Gradation_and_Fineness_on_Concrete_Properties.
[8] Yirui Z., Yang W., Jiawen B., Gang W., Zhiqiang D.. A novel seawater and sea sand concrete filled FRP-carbon steel composite tube column: Concept and behaviour.Composite Structures. 2020, 112421. In Press, Journal Pre-proof.https://doi.org/10.1016/j.compstruct.2020.112421.
[9] Junlong Y., Jizhong W., Ziru W. Axial Compressive Behavior of Partially CFRP Confined Seawater Sea-sand Concrete in Circular Columns– Part I: Experimental Study. Composite Structures. 2020, 112373. In Press, Journal Pre-proof. https://doi.org/10.1016/j.compstruct.2020.112373
[10] Safi B., Saidi M., Daoui A., Bellal A., Mechekak A. and Toumi K.. The use of seashells as a fine aggregate (by sand substitution) in self-compacting mortar (SCM), Construction and Buildings Materials. 2015, 78: 430-438
[11] Matthew Z., Yeon T., Kwong S. W., Muhammad E. R., Meheron S. J.. Mechanical and durability performance of marine sand and seawater concrete incorporating silicomanganese slag as coarse aggregate. Construction and Building Materials. Volume 254, 10 September 2020, 119195. https://doi.org/10.1016/j.conbuildmat.2020.119195
[12] Kaufmann J.. Evaluation of the combination of desert sand and calcium sulfoaluminate cement for the production of concrete. Construction and Building Materials. Volume 243, 20 May 2020, 118281. https://doi.org/10.1016/j.conbuildmat.2020.118281
[13] Benabed B., Kadri E. , Azzouz L. and Kenai S. , Properties of self compacting mortar made with various types of sand, Cement and Concrete Composites. 2012,34(10): 1167-1173
[14] Zeghichi L. 1 , Benghazi Z. 1 , Baali L., Eighth International Conference on Material Sciences, CSM8-ISM5 The effect of the kind of sands and additions on the mechanical behavior of S.C.C, Physics Procedia, 2014, 55: 485 – 492
[15] B. Benabed, L. Azzouz, E. Kadri, A. S. E. Belaidi, H. Soualhi. Propriétés physico-mécaniques et durabilité des mortiers à base du sable de dunes, université d’Amar Telidji de Laghouat, Algérie. 2012. http://www.univ-tebessa.dz/fichiers/laghouat /Contribution 1300.pdf 16/12/2016
[16] Srivastava A., Singh S. K.. Utilization of alternative sand for preparation of sustainable mortar: A review. Journal of Cleaner Production. 2020, 25320, Article 119706. https://doi.org /10.1016/j.jclepro.2019.119706
[17] Imane Joudi-bahri. Influence des sables fillérisés calcaires sur les propriétés des bétons courants et superplastifiés. Un exemple tunisien, thèse de doctorat, université Lorraine France. 2012.
[18] Arabi N., Meftah H., Amara H., Kebaïli O., Berredjem L.. Valorization of recycled materials in development of self-compacting concrete: Mixing recycled concrete aggregates – Windshield waste glass aggregates. Construction and Building Materials. 2019, 209: 364-376.
[19] NA 442-2008, Liants Hydrauliques-Ciments Courants, Composition, « Spécification et Critères de Conformité », IANOR, Alger (2008).
[20] NF EN 933-1 Mai 2012 Essais pour déterminer les caractéristiques géométriques des granulats - Partie 1 : détermination de la granularité - Analyse granulométrique par tamisage
[21] NF P18-597-1979 aggregates. Determination of cleanness for fine aggregates: sand equivalent with 10 per cent fines.
[22] NF EN 12350-2 Avril 2012 Essais pour béton frais - Partie 2 : essai d'affaissement -
[23] ASTM C 109-13,1 In: American Society for Testing and Materials (ASTM) International, West Conshohocken, Pa, (2013).
[24] NF EN 13057 décembre 2002. Indice de classement : P 18-945. Produits et systèmes pour la protection et la réparation des structures en béton. Méthodes d'essai. Détermination de l'absorption capillaire. Association Française de Normalisation (AFNOR) — 11, avenue Francis de Pressensé — 93571 Saint-Denis La Plaine Cedex.
Downloads
Published
2020-04-30
How to Cite
LAOUFI, L.; SENHADJ, Y.; LAOUFI, I.; BENAZZOUK, A. EFFECT OF THE SANDS CLOSE TO THE MASCARA REGION IN THE MANUFACTURE OF SELF-COMPACTING MORTARS. Journal of Fundamental and Applied Sciences, [S. l.], v. 12, n. 2, p. 931–950, 2020. DOI: 10.4314/jfas.v12i2.28. Disponível em: https://jfas.info/index.php/JFAS/article/view/403. Acesso em: 30 jan. 2025.
Issue
Section
Articles
Submissions
